Stainless steel AISI 321/EN 1.4541
Ø 6.5 , 8, 10, 12.5, 16, 20 mm
Inactive section approximately 10 mm at the connection end and approximately 5 mm at the other end.
250 mm fiberglass-reinforced nickel wire
Helical protective hose, zincified steel strip
Wave hose (gas- and liquid tight)
Reinforced, hose, zincified
Right angle casing
Broached holes are required. Tolerance H7 (Swedish standard). If a surface load greater that 20W/cm2 is required, individual adjustment is necessary.